8;\v'H6
(把您的配置显示出来)8;\v'H6
hostname aaa8;\v'H6
enable secret 5 $ul/V$ezbZFgvzGHD.YPSieC0Ew/8;\v'H6
enable password RouterA8;\v'H6
line vty 0 48;\v'H6
password ccc8;\v'H6
no snmp-server8;\v'H6
!8;\v'H6
ip routing8;\v'H6
no bridge 18;\v'H6
!8;\v'H6
interface FastEthernet0/08;\v'H6
media-type 100BaseX8;\v'H6
full-duplex8;\v'H6
ip address 192.168.0.1 255.255.255.08;\v'H6
!8;\v'H6
interface Serial0/08;\v'H6
encapsulation hdlc8;\v'H6
ip address 172.16.0.5 255.255.255.2528;\v'H6
!8;\v'H6
interface FastEthernet0/18;\v'H6
media-type 100BaseX8;\v'H6
full-duplex8;\v'H6
ip address 172.16.0.9 255.255.255.2528;\v'H6
dialer-list 1 protocol ip permit8;\v'H6
dialer-list 1 protocol ipx permit8;\v'H6
!8;\v'H6
end8;\v'H6
以下提示您是否保存这次设置8;\v'H6
[0] Go to the IOS command prompt without saving this config.8;\v'H6
[1] Return back to the setup without saving this config.8;\v'H6
[2] Save this configuration to nvram and exit.8;\v'H6
Enter your selection [2]: 28;\v'H6
选择2保存设置并存入NVRAM中8;\v'H6
Building configuration...8;\v'H6
[OK] Use the enabled mode 'configure' command to modify this configuration.8;\v'H6
Press RETURN to get started!8;\v'H6
路由器重新启动8;\v'H6
00:00:08: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down8;\v'H6
00:00:08: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up8;\v'H6
00:00:08: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up8;\v'H6
00:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down8;\v'H6
00:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down8;\v'H6
00:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down8;\v'H6
00:03:18: %IP-5-WEBINST_KILL: Terminating DNS process8;\v'H6
00:03:24: %SYS-5-RESTART: System restarted --8;\v'H6
Cisco Internetwork Operating System Software 8;\v'H6
IOS (tm) 3600 Software (C3640-I-M), Version 12.1(2)T, RELEASE SOFTWARE (fc1)8;\v'H6
Copyright (c) 1986-2000 by cisco Systems, Inc.8;\v'H6
Compiled Tue 16-May-00 12:26 by ccai8;\v'H6
RouterA>8;\v'H6
进入用户模式8;\v'H6
RouterA>en8;\v'H6
Password: 8;\v'H6
RouterA#8;\v'H6
进入全局模式8;\v'H6
RouterA#sh run8;\v'H6
查看现在运行的配置8;\v'H6
Building configuration...8;\v'H6
Current configuration:8;\v'H6
!8;\v'H6
version 12.18;\v'H6
service timestamps debug uptime8;\v'H6
service timestamps log uptime8;\v'H6
no service password-encryption8;\v'H6
!8;\v'H6
hostname RouterA8;\v'H6
!8;\v'H6
enable secret 5 $ul/V$ezbZFgvzGHD.YPSieC0Ew/8;\v'H6
enable password bbb8;\v'H6
信息来源:插座网 http://www.chazuo.com.cn/